Engine: Idling speed after warm-up (clutch off / out of gear)

Related KB links

• Engine shutdown procedure – Side mount RC type

  Procedure · 1. Put the control lever in the Neutral position and run the engine for 2–3 minutes at idling speed for cooling down if it has been running at full speed. 2. Turn the main switch key to the OFF position or push the st...

• ENOW00863-0 - Difficult to shift back to neutral after shifting to Forward or Reverse during warm-up

  Diagnostic · Cause: Idle speed is elevated during engine warm-up Test: Attempt to shift to neutral; if unsuccessful, stop engine, shift to neutral manually, then restart to continue warm-up

• Engine: Idling speed after warm-up (Clutch off / Out of gear)

  Spec · 950 min⁻¹ (rpm) conditions={"clutch":"Out of gear"}

• Starting Engine in Test Tank

  Procedure · 1. Remove the propeller before starting the engine in the test tank. 2. Ensure the water level in the test tank is over 10 cm (4 in.) above the intake. WARNING: Run the engine only at idling speed when using a test ta...

• 2 - Low oil pressure — Low Speed ESG activated; engine speed limited to 2800 min⁻¹ (rpm)

  Diagnostic · Cause: Low oil pressure causes oil pressure switch to turn ON, activating Low Speed ESG which suppresses ignition Test: Check engine oil level; add oil if necessary Expected: Oil pressure switch OFF under normal condi...