Specification
Engine Oil: 10W-40 maximum temperature
40 °C conditions={"viscosity":"10W-40"}
Specification
40 °C conditions={"viscosity":"10W-40"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tighten the oil filter to the correct torque. (torque: 24 Nm) WARNING: If a torque wrench is not available, a good estimate is 3/4 to 1 full turn past finger-tight. Have the oil filter adjusted to the correct torqu...
Diagnostic · Cause: Normal dilution from extended idling or trolling, especially in cooler water temperatures Test: Check operating conditions and oil consistency
Spec · 40 °C conditions={"viscosity":"10W-30"}
Procedure · 1. Warm the engine at low engine speeds for about 3 minutes if temperature is above 41°F (5°C), or 5 minutes at 2000 rpm if below 41°F (5°C). WARNING: Operating the engine without warm-up shortens the engine's life. 2...
Diagnostic · Cause: Fuel dilution of engine oil, potentially from extended idling or trolling, especially in cooler water temperatures Test: Smell engine oil for strong fuel odor during oil inspection