Engine: Operator Sound Pressure Level (ICOMIA 39/94)

Related KB links

• Fuel System Preparation and Engine Starting

  Procedure · 1. Full open the air vent screw on the fuel tank cap. 2. Loosen the tank cap until it contacts the tab lock and release internal pressure completely. After that, close the tank cap until two clicks sound is heard. 3. ...

• Low oil pressure with continuous buzzer, LED ON, and Low Speed ESG active

  Diagnostic · Cause: Low oil pressure (oil pressure switch ON) Test: Continuous buzzer sound; LED lamp ON; Low Speed ESG activated — ignition suppressed and fueling disabled; engine speed controlled under 2800 rpm

• MFS 6BZ: Operator Sound Pressure Level (ICOMIA 39/94 Rev.1)

  Spec · 81.5 dB(A)

• Response to Low Speed ESG Activation / Low Oil Pressure (Fault Code 2)

  Procedure · 1. Move to a safe place quickly. WARNING: Do not continue to run the engine even though speed is limited to 2800 min⁻¹ (rpm). 2. Stop the engine and allow it to cool down. 3. Check engine oil level and add engine oil ...

• Low compression

  Diagnostic · Cause: Low oil pressure/level