Specification
Fuel System: Maximum Ethanol Content
10 % conditions={"alcohol_type":"Ethyl alcohol (ethanol)"}
Specification
10 % conditions={"alcohol_type":"Ethyl alcohol (ethanol)"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Before adding fuel stabilizer additive, drain the carburetor (See page 80). 2. Follow the instructions on the label when adding the fuel stabilizer additive. 3. After adding the additive, let the outboard motor run...
Diagnostic · Cause: Emission control system issue
Spec · 10 % conditions={"fuelType":"Ethanol-blended gasoline","applicability":"Fuel system components"}
Procedure · 1. Check the amount of fuel in the tank. Replenish if low. 2. Check for debris or water in the fuel filters. Clean or replace as needed. 3. Check the rubber hoses for fuel leakage. Replace if leaking.
Diagnostic · Cause: Incorrect connection of fuel system