Specification
Ignition Spark Plug: Spark Plug Gap
0.8–0.9 mm conditions={"altUnit":"0.031–0.035 in"}
Specification
0.8–0.9 mm conditions={"altUnit":"0.031–0.035 in"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Fuel System – Fuel filter: Check and clean or replace if necessary. WARNING: Intervals: First 20 hrs/1 month, Every 50 hrs/3 months, Every 100 hrs/6 months, Every 200 hrs/1 year. 2. Fuel System – Carburetor: Strip,...
Diagnostic · Cause: Touching ignition coil or spark plug cord during start/operation Test: Safety inspection — ELECTRICAL SHOCK HAZARD label (5-4)
Spec · 0.8–0.9 mm conditions={"also":"0.031–0.035 in"}
Procedure · 1. Remove the top cowl. 2. Remove the spark plug caps. 3. Remove the spark plugs by turning counter-clockwise using a 5/8" (16 mm) socket wrench and handle provided in the tool bag. 4. Inspect the spark plug. Replace ...
Diagnostic · Cause: Engine load became too light, causing over-revolution Test: Buzzer sounds; High Speed ESG activated — spark plug ignition suppressed; engine speed controlled under 6300 rpm