Diagnostic
Electrical shock
Cause: Touching ignition coil or spark plug cord during start/operation Test: Safety inspection — ELECTRICAL SHOCK HAZARD label (5-4)
Diagnostic
Cause: Touching ignition coil or spark plug cord during start/operation Test: Safety inspection — ELECTRICAL SHOCK HAZARD label (5-4)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · NGK DCPR6E
Procedure · 1. Stop the engine and allow the motor to cool down completely before touching the spark plugs. WARNING: Do not touch spark plugs immediately after stopping the engine — they will be hot and could cause severe burns. ...
Spec · NGK DCPR6E
Procedure · 1. Fuel System – Check the amount of fuel in the tank. Replenish as needed. WARNING: Do not use outboard motor if any abnormality is found during pre-operation check or it could result in severe damage to the motor or...
Diagnostic · Cause: Touching engine surfaces during or immediately after operation Test: Visual/tactile check — HOT SURFACE label (5-2)