Specification
Lower Unit / Gear Case: Gear Oil Specification
API GL-5: SAE #80 to #90 conditions={"note":"Use genuine gear oil or recommended equivalent"}
Specification
API GL-5: SAE #80 to #90 conditions={"note":"Use genuine gear oil or recommended equivalent"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tilt down the outboard motor. WARNING: Be sure to lock the outboard motor in the tilt up position before any service to prevent accidental fall, which could cause severe personal injury. Do not go under the outboar...
Diagnostic · Cause: Water has entered the lower unit and mixed with the gear oil Test: Inspect drained gear oil color during oil change
Spec · API GL-5: SAE #80 to #90 conditions={"type":"Genuine or recommended gear oil"}
Procedure · 1. Install the upper oil plug. 2. Remove the oil tube nozzle. 3. Install the lower oil plug. WARNING: Do not reuse the oil plug gasket. Always use a new gasket and tighten the oil plug properly to prevent entry of wat...
Diagnostic · Cause: Possible water contamination in gear oil Test: Inspect gear oil color during oil change or inspection