MFS 8/9.8B: Idle Speed in Forward Gear

Related KB links

• Shifting into Forward or Reverse

  Procedure · 1. Ensure the boat is properly moored. WARNING: Make sure no swimmers are around the boat. 2. Verify that the outboard motor can be steered fully to the right and left. 3. Attach the emergency stop switch lanyard to t...

• ENOW00863-0 - Difficult to shift back to neutral after shifting to Forward or Reverse during warm-up

  Diagnostic · Cause: Idle speed is elevated during engine warm-up Test: Attempt to shift to neutral; if unsuccessful, stop engine, shift to neutral manually, then restart to continue warm-up

• MFS 8/9.8B: Idle Speed in Forward Gear

  Spec · 900 min⁻¹ (rpm) conditions={"model":"MFS 8/9.8B"}

• Pre-Shift Safety Checks – Tiller Handle Type

  Procedure · 1. Attach the emergency stop switch lanyard to the operator's PFD or arm before cruising and keep it attached at all times. WARNING: Do not attach the tether to clothing that can be torn easily. Arrange tether so it w...

• Poor idling / Poor acceleration / Engine speed abnormally high / Engine speed abnormally low

  Diagnostic · Cause: Improper thrust rod position