Specification
Valve Train: Exhaust Valve Clearance
0.18–0.22 mm (in: 0.0071–0.0087)
Specification
0.18–0.22 mm (in: 0.0071–0.0087)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Fuel System – Fuel filter: Check and clean or replace if necessary. WARNING: Intervals: First 20 hrs/1 month, Every 50 hrs/3 months, Every 100 hrs/6 months, Every 200 hrs/1 year. 2. Fuel System – Carburetor: Strip,...
Diagnostic · Cause: Incorrect valve clearance
Spec · 0.18–0.22 mm conditions={"altUnit":"0.0071–0.0087 in","type":"Exhaust"}
Procedure · 1. With the outboard motor installed on the boat, set the manual release valve to the MANUAL side, then tilt the outboard motor up and down manually 5–6 times. WARNING: Trapped air in the Power Tilt unit will cause po...
Diagnostic · Cause: Incorrect valve clearance