Procedure
1. Unlock and remove the engine cover (refer to engine cover removal procedure, p. 88). 2. Attach the hoist hooks to the engine hangers. 3. Disconnect the outboard motor from the boat, hoist the outboard motor, and move it to the storage area. 4. After the outboard motor is placed in storage and disconnected from the hoist, install the engine cover (refer to engine cover installation procedure, p. 88).
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Level with the water surface conditions={"mode":"Normal cruising"}
Diagnostic · Cause: Uncorrected underlying electrical problem in the system Test: Inspect electrical system for shorts or overloads; take outboard motor to an authorized Honda Marine dealer for inspection and service, or refer to ...
Spec · 2000–3000 rpm conditions={"phase":"Next 45 minutes","throttle_opening":"10%–30% of maximum","max_rpm_time_limit":"50% of the 45-minute period"}
Procedure · 1. Pull all the engine cover latches. 2. Remove the engine cover by lifting it straight up from the outboard motor.
Diagnostic · Cause: Serious cooling system malfunction requiring professional inspection Test: Return to nearest boat landing and have the outboard motor inspected by an authorized Honda Marine dealer