Procedure
Normal Engine Stopping - Side-Mount / Flush-Mount (Mechanical Wire) / Top-Mount (Mechanical Wire) Remote Control Types
1. Move the control lever to the N (NEUTRAL) position before stopping the engine.
Procedure
1. Move the control lever to the N (NEUTRAL) position before stopping the engine.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 20 degrees conditions={"direction":"either forward or reverse","note":"Further movement beyond 20° increases engine speed"}
Diagnostic · Cause: Control lever is in F (forward) or R (reverse) gear instead of N (neutral) Test: Confirm control lever is set to the N (neutral) position before attempting to start
Spec · Lights again after engine starts and stays lit to indicate normal oil pressure conditions={"event":"After engine start"}
Procedure · 1. Move the control lever to N (NEUTRAL) position.
Diagnostic · Cause: Control lever is not in the N (neutral) position; F (forward) or R (reverse) gear is engaged Test: Confirm the control lever is set to the N (neutral) position before attempting to start