Specification
Gearshift/Throttle Control Lever (Flush-Mount type): Gear engagement angle from neutral
20 degrees conditions={"direction":"either forward or reverse","note":"Further movement beyond 20° increases engine speed"}
Specification
20 degrees conditions={"direction":"either forward or reverse","note":"Further movement beyond 20° increases engine speed"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Ensure the gearshift/throttle control lever is in the NEUTRAL position. 2. Press and hold the [-] switch. 3. While holding the [-] switch, turn the gearshift/throttle control lever forward past the shift point. WAR...
Diagnostic · Cause: Control lever is in F (forward) or R (reverse) gear instead of N (neutral) Test: Confirm control lever is set to the N (neutral) position before attempting to start
Spec · 20 degrees conditions={"description":"Angle of control lever movement from N (neutral) required to select a gear (F or R)"}
Procedure · 1. Set the remote control lever in the NEUTRAL position (refer to p. 25-26). 2. Stop the engine (refer to p. 68). 3. Remove the engine cover (refer to p. 88). 4. Shift gear into NEUTRAL by inserting the Phillips screw...
Diagnostic · Cause: Control lever is not in the N (neutral) position; F (forward) or R (reverse) gear is engaged Test: Confirm the control lever is set to the N (neutral) position before attempting to start