Procedure
1. Use the [-] switch to change the operating station. 2. Press and hold the [-] switch of the inactive station when all remote control levers are in the NEUTRAL position to transfer operation to that station. WARNING: Ensure all remote control levers are in the NEUTRAL position before attempting to switch the active station. 3. Confirm station transfer: a long buzz sounds once and the ACT indicator comes on when the station can be operated.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · NEUTRAL, FORWARD, REVERSE
Diagnostic · Cause: One or more remote control levers may not be in NEUTRAL position Test: Verify all remote control levers are in the NEUTRAL position before attempting station transfer
Spec · 35 degrees conditions={"direction":"either forward or reverse"}
Procedure · 1. Place all gearshift/throttle control levers in the NEUTRAL position. 2. At the inactive station you wish to activate, press and hold the [-] switch until station select mode transfers control to that station.
Diagnostic · Cause: Possible low oil pressure or oil system fault Test: Check oil pressure indicator on p. 49; stop engine immediately and refer to p. 115