Diagnostic
Cause: One or more remote control levers may not be in NEUTRAL position Test: Verify all remote control levers are in the NEUTRAL position before attempting station transfer
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Procedure · 1. Use the [-] switch to change the operating station. 2. Press and hold the [-] switch of the inactive station when all remote control levers are in the NEUTRAL position to transfer operation to that station. WARNING...
Spec · Lights again after engine starts and stays lit to indicate normal oil pressure conditions={"event":"After engine start"}
Procedure · 1. Idle the engine in neutral and check the cooling system indicator for water flow. 2. If water is flowing from the cooling system indicator, continue idling for 30 seconds. 3. Confirm the overheat indicator turns of...
Diagnostic · Cause: Lubrication system fault Test: Return to nearest boat landing and have outboard motor inspected by authorized Honda Marine dealer