Gearshift/Throttle Control Lever: Gearshift/Throttle Control Lever Positions

Related KB links

• Gearshift/Throttle Control Lever: Gear selection angle from neutral

  Spec · 35 degrees conditions={"direction":"either forward or reverse"}

• Normal Engine Stopping – Flush-Mount Type and Top-Mount Type (DBW type)

  Procedure · 1. Move the control lever to N (NEUTRAL) position.

• Engine will not start

  Diagnostic · Cause: Control lever is not in the N (neutral) position; F (forward) or R (reverse) gear is engaged Test: Confirm the control lever is set to the N (neutral) position before attempting to start

• Gearshift/Throttle Control Lever: gearshift_position_for_start

  Spec · N (Neutral) conditions={"requirement":"Required for engine start"}

• Emergency Gear Shifting (DBW Type)

  Procedure · 1. Set the remote control lever in the NEUTRAL position (refer to p. 25-26). 2. Stop the engine (refer to p. 68). 3. Remove the engine cover (refer to p. 88). 4. Shift gear into NEUTRAL by inserting the Phillips screw...