Procedure
Transporting outboard motor removed from boat
1. Secure the outboard motor in either the vertical or horizontal position as shown on page 113.
Procedure
1. Secure the outboard motor in either the vertical or horizontal position as shown on page 113.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Level with the water surface conditions={"mode":"Normal cruising"}
Diagnostic · Cause: Serious cooling system malfunction requiring professional inspection Test: Return to nearest boat landing and have the outboard motor inspected by an authorized Honda Marine dealer
Spec · 2000–3000 rpm conditions={"phase":"Next 45 minutes","throttle_opening":"10%–30% of maximum","max_rpm_time_limit":"50% of the 45-minute period"}
Procedure · 1. Disconnect the fuel line from the fuel tank before trailering a boat with the outboard motor attached. WARNING: Always disconnect the fuel line from the fuel tank when trailering a boat with the outboard motor atta...
Diagnostic · Cause: Load in the front of the boat, or outboard motor trimmed too low Test: Observe boat attitude at speed; check trim angle and load distribution