Procedure
1. Remove the ignition switch key and store it safely. WARNING: Always remove and store the ignition key and emergency stop switch clip and lanyard when the boat is not in use. 2. Remove the emergency stop switch clip and lanyard and store them safely.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5 conditions={"timeWindow":"within 20 seconds"}
Diagnostic · Cause: Emergency stop switch clip is not inserted into the emergency stop switch Test: Verify clip is securely seated in the emergency stop switch
Spec · OFF, ON, START conditions={"note":"Key auto-returns from START to ON upon release"}
Procedure · 1. Move the control lever(s) to the N (neutral) position. 2. After cruising at full throttle, cool down the engine by idling for a few minutes before stopping the engine. 3. Turn the ignition switch key to the OFF pos...
Diagnostic · Cause: Emergency stop switch clip is not inserted in the emergency stop switch Test: Verify the emergency stop switch clip is fully seated in the emergency stop switch