Specification
BF200D: Transom Height (at 12° transom angle, Type XCRA/XCDA)
25.0 in (635 mm) conditions={"transom_angle":"12°","type":"XCRA, XCDA"}
Specification
25.0 in (635 mm) conditions={"transom_angle":"12°","type":"XCRA, XCDA"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Place all gearshift/throttle control levers in the NEUTRAL position. 2. At the inactive station you wish to activate, press and hold the [-] switch until station select mode transfers control to that station.
Diagnostic · Cause: One or more remote control levers may not be in NEUTRAL position Test: Verify all remote control levers are in the NEUTRAL position before attempting station transfer
Spec · 25.0 in (635 mm) conditions={"typeCode":"X","models":"BF200D, BF225D, BF250D"}
Procedure · 1. Move the control lever to N (NEUTRAL) position.
Diagnostic · Cause: Possible engine overheating Test: Check overheat indicator on p. 49; stop engine immediately and refer to p. 115