Specification
Controls: Recommended control lubricant
Silicone spray lubricant
Specification
Silicone spray lubricant
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. After each use in salt water or dirty water, wash the outside of the outboard motor with clean, fresh water. WARNING: Do not apply water or corrosion inhibitor directly to electrical components under the engine cov...
Diagnostic · Cause: Engine oil becomes less efficient as a lubricant due to water or fuel contamination from low-RPM or short-run operation cycles
Spec · Check/Adjust (dealer recommended) conditions={"interval":"Every 6 months or 100 hrs; Every year or 200 hrs"}
Procedure · 1. Push the engine cover until any gap between the engine cover and main body is eliminated. 2. Push all the engine cover latches to lock them. WARNING: The cover should be tight at the mid-case point. If the cover is...
Diagnostic · Cause: Potential emission control system issue