Engine: Break-in period total duration

Related KB links

• Engine Break-In Procedure

  Procedure · 1. Run the engine at trolling speed for the first 15 minutes. Use the minimum throttle opening necessary to operate the boat at a safe trolling speed. WARNING: Avoid continuous operation at a steady speed throughout t...

• 'Periodic Maintenance' indication remains in display after service

  Diagnostic · Cause: Hour counter was not reset after periodic maintenance was performed Test: Check whether hour counter was reset; reset if not done

• Engine: Break-in Phase 4 max continuous full-throttle duration

  Spec · 5 minutes conditions={"phase":"Next 8 hours","note":"Do not run at full throttle for more than 5 minutes at a time"}

• Maintenance Schedule – Regular Service Periods

  Procedure · 1. Check engine oil level before each use. 2. Change engine oil at first month or 20 hours, then every 6 months or 100 hours. 3. Replace engine oil filter every 6 months or 100 hours (dealer recommended). 4. Change ge...

• Buzzer sounds and overheat indicator activates during acceleration

  Diagnostic · Cause: Engine was not sufficiently warmed up before raising engine speed Test: Check warm-up duration and fast idle lever position prior to throttle increase