Specification
Engine: Cooling System
Water cooling with thermostat
Specification
Water cooling with thermostat
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Idle the engine in neutral and check the cooling system indicator for water flow. 2. If water is flowing from the cooling system indicator, continue idling for 30 seconds. 3. Confirm the overheat indicator turns of...
Diagnostic · Cause: Cooling system problem such as clogged water intakes Test: Inspect water intakes for blockage
Spec · Water cooling with thermostat
Procedure · 1. Stop the engine and remove the engine cover (see p. 88). WARNING: Ensure the engine is fully stopped before removing the engine cover. 2. Confirm that there is no cooling water leakage from the engine. Tools: Castl...
Diagnostic · Cause: Temporary overheating; cooling system otherwise functional Test: Continue idling for 30 seconds; overheat indicator should turn off and engine should respond normally to throttle control lever