Procedure
1. Stop the engine and remove the engine cover (see p. 88). WARNING: Ensure the engine is fully stopped before removing the engine cover. 2. Confirm that there is no cooling water leakage from the engine. Tools: Castle nut wrench (not included with standard tool set — contact authorized Honda Marine dealer) Parts: Marine Grease, Thrust Washer, Castle Nut, Washer, Propeller, Cotter Pin
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Diagnostic · Cause: Serious cooling system malfunction requiring professional inspection Test: Return to nearest boat landing and have the outboard motor inspected by an authorized Honda Marine dealer
Spec · Check conditions={"interval":"Each use; Every 6 months or 100 hrs"}
Procedure · 1. Remove the emergency stop switch clip from the emergency stop switch to prevent accidental engine start. WARNING: The propeller blades may have sharp edges; wear heavy gloves to protect your hands. 2. Apply marine ...
Diagnostic · Cause: Lubrication system fault Test: Return to nearest boat landing and have outboard motor inspected by authorized Honda Marine dealer