Specification
Propeller and Cotter Pin: propeller_cotter_pin_check
Check conditions={"interval":"Each use; Every 6 months or 100 hrs"}
Specification
Check conditions={"interval":"Each use; Every 6 months or 100 hrs"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Check engine oil level before each use. 2. Change engine oil at first month or 20 hours, then every 6 months or 100 hours. 3. Replace engine oil filter every 6 months or 100 hours (dealer recommended). 4. Change ge...
Diagnostic · Cause: Rev limiter activation due to excessive tilt angle or propeller ventilation during sharp turn Test: Check trim angle of the outboard motor
Spec · 33 lbf·ft conditions={"stage":"Final alignment to cotter pin hole","equivalentSI":"44 N·m","equivalentMetric":"4.5 kgf·m","note":"Do not exceed this limit or propeller and shaft may be damaged"}
Procedure · 1. Check the engine oil level (p. 89). WARNING: Running the engine with a low oil level can cause engine damage. Overfilling the engine can cause it to smoke or have oil leaks, which can also cause engine damage. 2. C...
Diagnostic · Cause: Operating in ambient temperatures at or below 32°F (0°C) without proper precautions Test: Check ambient temperature and cooling system condition