Diagnostic
Rev limiter engaged - Engine speed unstable at high speed (Rev limiter engaged)
Cause: Rev limiter activation due to excessive tilt angle or propeller ventilation during sharp turn Test: Check trim angle of the outboard motor
Diagnostic
Cause: Rev limiter activation due to excessive tilt angle or propeller ventilation during sharp turn Test: Check trim angle of the outboard motor
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Level with the water surface conditions={"mode":"Normal cruising"}
Procedure · 1. Use the power trim/tilt switch (UP or DN side) to adjust the angle of the outboard motor. The switch can be used whether the boat is underway or stopped. 2. Refer to the trim meter (p. 44) for an indication of whet...
Spec · 20 degrees conditions={"direction":"either forward or reverse","note":"Further movement beyond 20° increases engine speed"}
Procedure · 1. Use the power trim/tilt switch (see pages 75–76) to tilt the outboard motor up so the propeller and gear case clear the bottom. 2. Proceed at low speed. 3. Monitor water flow from the cooling system indicator (see ...
Diagnostic · Cause: Outboard motor trimmed or tilted up excessively, or propeller ventilation during a sharp turn Test: Check trim angle of outboard motor; verify correct propeller is installed