Specification
Engine Oil: Engine Oil Refill Capacity (Without Oil Filter Change)
8.0 US qt conditions={"filterChange":"No","also":"7.6 L"}
Specification
8.0 US qt conditions={"filterChange":"No","also":"7.6 L"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Unlock and remove the engine cover. WARNING: Drain the used oil while the engine is warm. Warm oil drains quickly and completely. 2. Place a suitable container below the oil drain guide to catch the used oil, then ...
Diagnostic · Cause: Running engine with low oil level Test: Check engine oil level before each use (p. 89)
Spec · 8.2 US qt conditions={"filterChange":"Yes","also":"7.8 L"}
Procedure · 1. Install the oil filler cap and tighten it securely. Do not overtighten. WARNING: Do not overtighten the oil filler cap. 2. Install and lock the engine cover (refer to p. 88).
Diagnostic · Cause: Water ingestion into the engine during submersion Test: Inspect used engine oil for signs of water contamination during oil change