Gearcase: Gear Change Type

Related KB links

• Change Operating Station (Multiple Station Type Only)

  Procedure · 1. Place all gearshift/throttle control levers in the NEUTRAL position. 2. At the inactive station you wish to activate, press and hold the [-] switch until station select mode transfers control to that station.

• Gear cannot be shifted using remote control lever (DBW type)

  Diagnostic · Cause: DBW shift actuator malfunction preventing normal electronic gear shifting Test: Attempt normal gear shift via remote control lever; if unresponsive, proceed with manual emergency shift procedure using Phillips ...

• BF250D: Gear Change

  Spec · Dog type (Forward-Neutral-Reverse)

• Pre-Start Safety Setup – Flush-mount Mechanical Wire Type Emergency Stop Switch

  Procedure · 1. Insert the emergency stop switch clip into the emergency stop switch, then attach the emergency stop switch lanyard securely to the operator or to the operator's PFD (Personal Flotation Device). WARNING: The engine...

• ACT indicator does not come on after pressing and holding [-] switch

  Diagnostic · Cause: One or more remote control levers may not be in NEUTRAL position Test: Verify all remote control levers are in the NEUTRAL position before attempting station transfer