Specification
Iridium Spark Plug: Spark Plug Gap
0.039 – 0.043 inches conditions={"equivalent_metric":"1.0 – 1.1 mm"}
Specification
0.039 – 0.043 inches conditions={"equivalent_metric":"1.0 – 1.1 mm"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Follow the same installation and removal procedure as standard spark plugs. 2. Do NOT clean the iridium spark plugs. If an electrode is contaminated with accumulated objects or dirt, replace the spark plug with a n...
Diagnostic · Cause: Electrode wear or damage Test: Measure gap using wire-type feeler gauge Expected: 0.039 – 0.043 inches (1.0 – 1.1 mm) inches
Spec · 0.039 – 0.043 in (1.0 – 1.1 mm) conditions={}
Procedure · 1. Remove the spark plugs using a spark plug wrench and 19 mm eye wrench. 2. Inspect the spark plugs. Replace them if the electrodes are worn, or if the insulators are cracked or chipped. 3. Measure the spark plug ele...
Diagnostic · Cause: Normal wear or operating conditions Test: Visual inspection of iridium spark plug electrode Expected: Clean, uncontaminated electrode