Specification
Oil Filter: Oil Filter Tightening Torque
9 lbf·ft conditions={"also":"12 N·m, 1.2 kgf·m","method":"Hand-tight until contact, then 7/8 turn additional with suitable tool"}
Specification
9 lbf·ft conditions={"also":"12 N·m, 1.2 kgf·m","method":"Hand-tight until contact, then 7/8 turn additional with suitable tool"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Drain the engine oil, then reinstall the drain bolt, washer, and drain bolt cover per the Engine Oil Change procedure (p. 91). 2. Tilt the outboard motor and place a suitable container below the oil drain guide to ...
Diagnostic · Cause: Overtightening of spark plugs Test: Verify spark plug torque does not exceed specified value (13 lbf·ft / 18 N·m) Expected: 13 lbf·ft
Spec · 17 lbf·ft conditions={"also":"23 N·m, 2.3 kgf·m"}
Procedure · 1. Install the spark plugs carefully, by hand, to avoid cross-threading. 2. After each spark plug seats, tighten with the spark plug wrench supplied in the tool kit to compress the sealing washer. (torque: 13 lbf·ft) ...
Diagnostic · Cause: Water condensation in the engine mixing with oil, caused by running the engine below 3,000 rpm for more than 30% of the time or frequent starting and stopping without allowing the engine to warm up Test: Inspec...