Specification
Engine Oil Drain Bolt: Engine Oil Drain Bolt Tightening Torque
17 lbf·ft conditions={"also":"23 N·m, 2.3 kgf·m"}
Specification
17 lbf·ft conditions={"also":"23 N·m, 2.3 kgf·m"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Unlock and remove the engine cover. WARNING: Drain the used oil while the engine is warm. Warm oil drains quickly and completely. 2. Place a suitable container below the oil drain guide to catch the used oil, then ...
Diagnostic · Cause: Water condensation in the engine mixing with oil, caused by running the engine below 3,000 rpm for more than 30% of the time or frequent starting and stopping without allowing the engine to warm up Test: Inspec...
Spec · 9 lbf·ft conditions={"also":"12 N·m, 1.2 kgf·m","method":"Hand-tight until contact, then 7/8 turn additional with suitable tool"}
Procedure · 1. Drain the engine oil, then reinstall the drain bolt, washer, and drain bolt cover per the Engine Oil Change procedure (p. 91). 2. Tilt the outboard motor and place a suitable container below the oil drain guide to ...
Diagnostic · Cause: Running engine with low oil level Test: Check engine oil level before each use (p. 89)