Specification
Outboard Motor: Transom Height (at 12° transom angle) – Standard
20.0 in (508 mm) conditions={"transomAngle":"12°"}
Specification
20.0 in (508 mm) conditions={"transomAngle":"12°"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Clean and tighten battery connections.
Diagnostic · Cause: Load in the rear of the boat, or outboard motor trimmed too high Test: Observe boat attitude at speed; check trim angle and load distribution
Spec · 25.0 in (635 mm) conditions={"transomAngle":"12°"}
Procedure · 1. Use the power trim/tilt switch (UP or DN side) to adjust the angle of the outboard motor. The switch can be used whether the boat is underway or stopped. 2. Refer to the trim meter (p. 44) for an indication of whet...
Diagnostic · Cause: Load in the front of the boat, or outboard motor trimmed too low Test: Observe boat attitude at speed; check trim angle and load distribution