Specification
Power Trim/Tilt Switch Panel: PTT Switch Panel – Triple Type Configuration
3 outboard motors conditions={"type":"TRIPLE TYPE","positions":"PORT, CENTER, STARBOARD","UP":"Raises bow","DN":"Lowers bow"}
Specification
3 outboard motors conditions={"type":"TRIPLE TYPE","positions":"PORT, CENTER, STARBOARD","UP":"Raises bow","DN":"Lowers bow"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Use the power tilt switch to tilt the outboard motor up. 2. Move the tilt lock lever to the FREE position. 3. Lower the outboard motor to the desired position.
Diagnostic · Cause: One or more remote control levers may not be in NEUTRAL position Test: Verify all remote control levers are in the NEUTRAL position before attempting station transfer
Spec · 2 outboard motors conditions={"type":"DUAL TYPE","UP":"Raises bow","DN":"Lowers bow"}
Procedure · 1. Turn the power switch to the right. The power will not be turned ON unless the Honda Smart Key is authenticated. 2. Push the START/STOP switch to start the engine. 3. When the boat is mounted with two outboard moto...
Diagnostic · Cause: Ignition switch turned to START position while engine is already running