Procedure
Lowering the Outboard Motor
1. Use the power tilt switch to tilt the outboard motor up. 2. Move the tilt lock lever to the FREE position. 3. Lower the outboard motor to the desired position.
Procedure
1. Use the power tilt switch to tilt the outboard motor up. 2. Move the tilt lock lever to the FREE position. 3. Lower the outboard motor to the desired position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Level with the water surface conditions={"mode":"Normal cruising"}
Diagnostic · Cause: Rev limiter activation due to excessive tilt angle or propeller ventilation during sharp turn Test: Check trim angle of the outboard motor
Spec · 2 outboard motors conditions={"type":"DUAL TYPE","UP":"Raises bow","DN":"Lowers bow"}
Procedure · 1. After stopping the engine, leave the outboard motor in the running position for one minute to drain water from inside the engine. WARNING: Do not tilt up before the one-minute drain period has elapsed. 2. Stop the ...
Diagnostic · Cause: Clogged discharge port or blocked water intake screens Test: Stop the engine, check the discharge port, then tilt the outboard motor and inspect the water intake screens for clogs