Diagnostic
Reduced horsepower, torque, peak RPM, and cranking compression
Cause: Reduced air density from above sea level elevation, high temperature, low barometric pressure, or high humidity
Diagnostic
Cause: Reduced air density from above sea level elevation, high temperature, low barometric pressure, or high humidity
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5 seconds conditions={"condition":"Initial start or fuel system empty"}
Procedure · 1. Verify the engine is in a level vertical position. 2. Verify the vessel fuel supply line is connected to the outboard fuel system inlet fitting. 3. Turn the ignition key on. The fuel pumps will run for approximatel...
Spec · Sum of both positive and negative cables conditions={"note":"Total combined length used to determine required wire gauge from chart"}
Procedure · 1. Shift the outboard to the neutral (N) position. 2. Turn the ignition key to the START position and release the key. The electronic starting system will automatically crank the engine for starting. 3. If the engine ...
Diagnostic · Cause: Reduced air density due to above sea level elevation, high temperature, low barometric pressure, or high humidity