Starter Motor Will Not Crank the Engine

Related KB links

• Starter Motor: Maximum starter crank duration per event

  Spec · 8 seconds conditions={"event":"FSM priming – ran out of fuel condition"}

• Initial Engine Start / Starting Procedure

  Procedure · 1. Shift the outboard to the neutral (N) position. 2. Turn the ignition key to the START position and release the key. The electronic starting system will automatically crank the engine for starting. 3. If the engine ...

• Starter Motor: Starter motor cool-down period between crank events

  Spec · 20–30 seconds conditions={"event":"FSM priming – ran out of fuel condition"}

• Priming the FSM (Ran out of Fuel Condition) – Without Purge Tool

  Procedure · 1. Verify the engine is in a level vertical position. 2. Verify the vessel fuel supply line is connected to the outboard fuel system inlet fitting. 3. Turn the ignition key on. The fuel pumps will run for approximatel...

• Starter Motor Will Not Crank the Engine

  Diagnostic · Cause: Lanyard stop switch not in RUN position