Procedure

Before Each Use Inspection

1. Check engine oil level. Refer to Fuel and Oil - Checking and Adding Engine Oil. 2. Check that lanyard stop switch stops the engine. 3. Inspect the outboard for tightness to the boat transom. Tighten mounting fasteners to specified torque if any looseness exists. Look for loss of material or paint caused by movement between fasteners and transom brackets, and between transom brackets and the boat transom (lift plate/setback bracket). 4. Visually inspect the fuel system for deterioration or leaks. 5. Check steering system for binding or loose components. 6. Check propeller blades for damage. 7. Inspect the hydraulic steering fittings and hoses for leaks or damage, if equipped. 8. Inspect the hydraulic steering fluid level, if equipped.