Procedure
Fuse Inspection and Replacement
1. Open the fuse holder. 2. Look at the silver colored band inside the fuse. If the band is broken, the fuse is blown. 3. Replace the blown fuse with a new fuse of the same amperage rating.
Procedure
1. Open the fuse holder. 2. Look at the silver colored band inside the fuse. If the band is broken, the fuse is blown. 3. Replace the blown fuse with a new fuse of the same amperage rating.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · First 20° conditions={"usage":"Operating the boat on plane"}
Diagnostic · Cause: Open circuit in the alternator output wire (fused link)
Spec · Within cross-hatched region between bottom bar and top bar conditions={"note":"Do not attempt to fill to the top of the operating range; oil is correct as long as it appears anywhere within the cross-hatched region"}
Procedure · 1. Always carry spare fuses. WARNING: The electrical wiring circuits on the outboard are protected from overload by fuses in the wiring. If a fuse is blown, try to locate and correct the cause of the overload before r...
Diagnostic · Cause: Improper reassembly or damaged fuel system component Test: Visual inspection of all serviced fuel system connections and components before starting the engine