Procedure
Increasing Speed After Shifting Into Gear
1. After shifting the outboard into gear, advance the throttle lever further to increase speed.
Procedure
1. After shifting the outboard into gear, advance the throttle lever further to increase speed.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 700 RPM
Diagnostic · Cause: Cable barrel adjustment too close to the cable end Test: Shift remote control into reverse while turning propeller and check if propeller shaft locks Expected: Propeller shaft locked in gear
Spec · 700–800 RPM
Procedure · 1. Ensure engine speed is at idle before shifting into or out of gear. WARNING: Shifting at higher than idle speed could cause damage to the gearcase. 2. Do not shift into reverse when forward motion of the boat is gr...
Diagnostic · Cause: Shift cable barrel position too far from cable end Test: Shift remote control into forward and check if propeller shaft is locked in gear Expected: Propeller shaft locked in gear