Procedure
Stopping the Engine
1. Reduce the engine speed. 2. Shift the outboard to neutral position. 3. Turn the ignition key to the 'OFF' position.
Procedure
1. Reduce the engine speed. 2. Shift the outboard to neutral position. 3. Turn the ignition key to the 'OFF' position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Within cross-hatched region between bottom bar and top bar conditions={"note":"Do not attempt to fill to the top of the operating range; oil is correct as long as it appears anywhere within the cross-hatched region"}
Diagnostic · Cause: Outboard is not shifted to neutral position
Spec · Mercury or Quicksilver SAE 25W-40 Synthetic Blend Marine 4-Stroke Engine Oil conditions={"use":"Optional choice"}
Procedure · 1. Reduce engine speed below 2000 RPM. 2. Tilt the outboard up. Make sure all water intake holes stay submerged at all times. WARNING: Ensure all water intake holes remain submerged at all times to prevent engine dama...
Diagnostic · Cause: Critical sensor fault detected by Engine Guardian system Test: Reduce engine speed; identify and correct fault; reset by moving throttle lever back to idle position