Specification
Ignition system: Fuse 4 - IGN rating
20 amp conditions={"fuse_label":"IGN","fuse_number":"4"}
Specification
20 amp conditions={"fuse_label":"IGN","fuse_number":"4"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Open the fuse holder. 2. Look at the silver colored band inside the fuse. If the band is broken, the fuse is blown. 3. Replace the blown fuse with a new fuse of the same amperage rating.
Diagnostic · Cause: Ignition system component failure
Spec · 20 amp conditions={"fuse_label":"FUEL","fuse_number":"2"}
Procedure · 1. Shift the outboard to the neutral (N) position. 2. Turn the ignition key to the START position and release the key. The electronic starting system will automatically crank the engine for starting. 3. If the engine ...
Diagnostic · Cause: Ignition system component failure