Specification
Outboard motor oil sump: Oil add quantity when below operating range
500 ml (16 oz) conditions={"situation":"Oil level below operating range (cross hatched region)"}
Specification
500 ml (16 oz) conditions={"situation":"Oil level below operating range (cross hatched region)"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. If the oil level is below the operating range (cross hatched region), remove the oil filler cap and add approximately 500 ml (16 oz) of the specified outboard motor oil. WARNING: Do not try to fill to the upper end...
Diagnostic · Cause: Insufficient engine oil Test: Check engine oil level per Fuel and Oil – Checking and Adding Engine Oil procedure
Spec · Within cross-hatched region between bottom bar and top bar conditions={"note":"Do not attempt to fill to the top of the operating range; oil is correct as long as it appears anywhere within the cross-hatched region"}
Procedure · 1. Before starting (cold engine), tilt outboard out/up past vertical to allow trapped oil to drain back to the oil sump. Allow outboard to remain tilted for approximately one minute. WARNING: Do not overfill. Check oi...
Diagnostic · Cause: Age, storage conditions, or use of alcohol-blend fuels washing protective oil films from internal components