Specification
Spark plug holes: Storage Seal Rust Inhibitor quantity per cylinder
30 ml (1 fl oz) conditions={"application":"Storage"}
Specification
30 ml (1 fl oz) conditions={"application":"Storage"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Refer to Maintenance – Spark Plug Inspection and Replacement for the correct procedure for removing spark plugs. 2. Change the engine oil and filter. 3. Remove the spark plugs. 4. Spray approximately 30 ml (1 fl oz...
Diagnostic · Cause: Spark plugs fouled or defective — refer to Maintenance section
Spec · 27 Nm conditions={"lb-ft":"20"}
Procedure · 1. Check low-pressure fuel filter for contaminants. Replace filter if required. Refer to Fuel System. 2. Remove the propeller and lubricate the propeller shaft. Refer to Propeller Replacement. 3. Inspect the condition...
Diagnostic · Cause: Spark plugs fouled or defective — refer to Maintenance section