Specification
Starter Motor: Starter motor cool-down period between start attempts
20–30 seconds conditions={"condition":"Multiple start attempts required"}
Specification
20–30 seconds conditions={"condition":"Multiple start attempts required"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Shift the outboard to the neutral (N) position. 2. Turn the ignition key to the START position and release the key. The electronic starting system will automatically crank the engine for starting. 3. If the engine ...
Diagnostic · Cause: Fuel system not primed (e.g., new engine, ran out of fuel, or fuel was drained) Test: Turn ignition to ON for ~5 seconds, then turn to START and release; engine cranks up to 8 seconds. Repeat until engine remai...
Spec · 20–30 seconds conditions={"event":"FSM priming – ran out of fuel condition"}
Procedure · 1. Verify the engine is in a level vertical position. 2. Verify the vessel fuel supply line is connected to the outboard fuel system inlet fitting. 3. Turn the ignition key on. The fuel pumps will run for approximatel...
Diagnostic · Cause: Weak battery or battery connections are loose or corroded