Specification
Transom Drilling Fixture: Transom Drilling Fixture Part Number
91-98234A2
Specification
91-98234A2
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Before drilling any mounting holes, carefully read Determining Recommended Outboard Mounting Height and install outboard to the nearest recommended mounting height. WARNING: IMPORTANT: Do not skip the mounting heig...
Diagnostic · Cause: Impact damage from submerged object collision Test: Stop engine immediately and visually inspect outboard for broken or loose parts; check hull for fractures, transom fractures, or water leaks
Spec · 84.2 cm (33 in.) conditions={"configuration":"Single engine"}
Procedure · 1. Apply marine sealer to the shanks of the bolts, not to the threads. WARNING: Clearance must be maintained between the vessel transom and the outboard transom bracket relief radius area. Failure to maintain clearanc...
Diagnostic · Cause: Non-flat or stepped transom mounting surface exceeding 3.17 mm (0.125 in.) tolerance