Diagnostic
Cause: Abnormal gear wear Test: Examine drained gearcase lubricant for metal particles; small amounts indicate normal wear, excessive amounts or chips indicate abnormal wear
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Lubricate all outboard components listed in the Maintenance – Inspection and Maintenance Schedule. 2. Touch up any paint nicks. See your dealer for touch-up paint. 3. Spray Quicksilver or Mercury Precision Lubrican...
Procedure · 1. If the boat is moored in water, tilt the outboard so the gearcase is completely out of water when not in use (except in freezing temperatures). 2. Wash the outboard exterior and flush out the exhaust outlet of the ...
Procedure · 1. Remove the spark plug boot by twisting the rubber boot slightly and pulling it off. Do not use any sharp object or metal tool to remove the spark plug boots. WARNING: Damaged spark plug boots may emit sparks that c...
Procedure · 1. Assess current trim angle while underway. Observe bow attitude relative to the water surface. 2. If the bow is entering the water (trim down / trim angle too small): water may enter the boat and speed will decrease...