Diagnostic
Unexpected loss of forward motion during normal operation
Cause: Accidental or unintended activation of the lanyard stop switch Test: Inspect lanyard cord and switch for damage or wear before each use
Diagnostic
Cause: Accidental or unintended activation of the lanyard stop switch Test: Inspect lanyard cord and switch for damage or wear before each use
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2 minutes conditions={"phase":"First hour of operation"}
Procedure · 1. Before each use, start the engine and stop it by pulling the lanyard cord to verify the stop switch works properly. WARNING: If the engine does not stop when the lanyard cord is pulled, have the switch repaired bef...
Spec · 3 minutes conditions={"phase":"Before operation"}
Procedure · 1. Trail the boat with the outboard tilted down (normal operating position). Do NOT rely on the tilt lock mechanism to support the outboard in the tilted up position during trailering. WARNING: The tilt lock mechanism...
Diagnostic · Cause: Lanyard too short or not coiled, increasing likelihood of accidental activation Test: Check lanyard length (should be 122–152 cm stretched); ensure lanyard is coiled to minimize at-rest length