Procedure
Cowl Installation
1. Engage the front hook and push cowl back over the cowl seal. 2. Push cowl down and move the rear latch lever up to lock.
Procedure
1. Engage the front hook and push cowl back over the cowl seal. 2. Push cowl down and move the rear latch lever up to lock.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 1:50 conditions={"period":"After break-in"}
Diagnostic · Cause: Improper installation of the outboard on the transom Test: Verify outboard is mounted per Mercury Marine validated fastener instructions and torque specifications
Spec · Mercury or Quicksilver Premium Plus TC-W3 2-Cycle Outboard Oil conditions={"note":"For added protection and lubrication"}
Procedure · 1. Unlock the rear latch by pushing the lever down. 2. Lift the rear of the cowl and disengage the front hook.
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking