Procedure
Top Cowl Removal
1. Unlock the rear latch by pushing the lever down. 2. Lift the rear of the cowl and disengage the front hook.
Procedure
1. Unlock the rear latch by pushing the lever down. 2. Lift the rear of the cowl and disengage the front hook.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Thermostat controlled
Diagnostic · Cause: Faulty lanyard stop switch Test: Start the engine and stop it by pulling the lanyard cord; if the engine does not stop, the switch requires repair
Procedure · 1. Engage the front hook and push cowl back over the cowl seal. 2. Push cowl down and move the rear latch lever up to lock.
Diagnostic · Cause: Accidental or unintended activation of the lanyard stop switch Test: Inspect lanyard cord and switch for damage or wear before each use
Procedure · 1. Stop the engine. Shift the outboard into Forward (F) gear. 2. Take hold of the top cowl grip and raise the outboard to the full up position. 3. Slightly lower the motor for locking at the tilt-up position. 4. The s...