Procedure
3. Attach the fuel connector to the engine connector. 4. Ensure the arrow mark on the primer bulb is facing the engine (separate fuel tank). 5. Open the fuel valve (internal fuel tank). Identify the air vent screw (a) and fuel valve (b). 6. Feed fuel to the carburetor by squeezing the primer bulb until it is firm (separate fuel tank). Fuel flows from the fuel tank (a) through the bulb toward the engine (b) in the indicated direction (c).
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2.5 L (0.66 US gal) primary / 12 L (3.17 US gal) separate tank L conditions={"model":"5B-D","note":"12 L separate tank used in dual fuel tank system"}
Diagnostic · Cause: Water or dirt in the fuel tank or fuel filter Test: Inspect and drain fuel tank; inspect fuel filter for water or dirt contamination
Spec · 5 minutes conditions={"gearPosition":"Neutral","throttlePosition":"Idle RPM","context":"Storage preparation – stabilized fuel run-through"}
Procedure · 1. Drain all fuel from the fuel tank. 2. Remove the fuel lines from the fuel filter (located between the fuel valve and the fuel pump). 3. Inspect the fuel filter. If there is water or dirt inside, replace the filter....
Diagnostic · Cause: Cracks, swelling, leaks, hardness, or other signs of damage to fuel line or primer bulb Test: Visual inspection of fuel line and primer bulb