Procedure

Outboard Engine Installation on Transom

1. Position the outboard at the center of the transom. Mount it using a cushioning pad or plate. 2. Measure the transom height of the boat. Verify the anti-ventilation plate sits 30–50 mm (1.2–2 in.) below the bottom of the boat hull. 3. Tighten the clamp screws by turning their handles. Secure with a cable to prevent accidental loss overboard. WARNING: Secure clamp screws with a safety cable to prevent the engine from being lost overboard. Parts: Cushioning pad or plate, Clamp screw, Safety/retention cable