Procedure
1. Refer to Propeller Replacement procedure for removal and installation of the propeller. 2. Coat the entire propeller shaft with Quicksilver or Mercury Precision Lubricants Extreme Grease (8M0071842) or 2-4-C with PTFE (92-802859A 1) to prevent the propeller hub from corroding to the shaft. Parts: 2-4-C with PTFE (92-802859A 1), Extreme Grease (8M0071842)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2-4-C with PTFE conditions={"Tube Ref No.":"95","purpose":"Prevent propeller hub from corroding to shaft"}
Diagnostic · Cause: Insufficient ventilation, enclosed cabin/cockpit, or proximity to exhaust areas while engine is running Test: Check ventilation of passenger area; inspect for enclosed or canvas-covered spaces with inadequate a...
Spec · Extreme Grease conditions={"purpose":"Prevent propeller hub from corroding to shaft"}
Procedure · 1. Remove the spark plug lead to prevent the engine from starting. WARNING: Rotating propellers can cause serious injury or death. Never operate the boat out of the water with a propeller installed. Before installing ...
Diagnostic · Cause: Improper installation of the outboard on the transom Test: Verify outboard is mounted per Mercury Marine validated fastener instructions and torque specifications